AS1000 & AS2000 User Manual
Alloy Computer Products Pty Ltd Copyright ©2017
Appendix A. Troubleshooting
Diagnosing Switch Indicators
The Power Led Is Off
•
Make sure the AC power cord is connected to the switch and power source
properly.
•
Make sure the power source is ON.
The Link/Act Led Is Off When a Device Is Connected To the
Corresponding Port
•
Make sure that the cable connectors are firmly plugged into the switch and
the device.
•
Make sure the connected device is turned on and working properly.
•
The cable must be less than 100 meters long (328 feet).
•
Check the port on the attached device and cable connections for possible
•
defects. Replace the defective cable if necessary.
Power and Cooling Problems
If the power indicator does not turn on when the power cord is plugged in, you may
have a problem with the power outlet, power cord, or internal power supply.
However, if the unit powers off after running for a while, check for loose power
connections, power losses or surges at the power outlet. If you still cannot isolate
the problem, the internal power supply may be defective.
