SG-9500 Hardware Guide
5
Preparation and Installation
This chapter provides information on unpacking and installing the SG-9500.
DANGER
Servicing and installation of this product is to be performed by trained
service personnel only.
DANGER L'installation et l'entretien de ce produit doivent être effectués
uniquement par des techniciens d'entretien dument formés.
5.1
Unpacking the SG-9500
ATTENTION
To minimize the risk of physical damage to the equipment, ensure that
the floor space is free of other equipment and/or commodities.
Follow these recommendations while unpacking:
•
After the equipment arrives at the installation site, carefully inspect each
carton for signs of shipping damage. If the package is damaged, document
the damage with photographs and contact the transport carrier
immediately.
•
Remove all items from the box. If any items listed on the purchase order
are missing, notify Allot customer service immediately.
•
Inspect the product for damage. If there is damage, notify Allot customer
service immediately.
•
Save the box and packing material for possible future shipment.
•
Keep tools and components off the floor and away from foot traffic.
•
Clear the area of possible hazards, such as moist floors, ungrounded
power extension cables, and missing safety grounds.
•
Keep the area around the Service Gateway free from dust and foreign
conductive material.