ANO
Analog Gateway User Manual
2 &y
www.allo.com
Version 2.0
58
Figure 52: Create FXO Trunk
3)
Select the port and give a name to that trunk and click Add.
4)
Create outgoing calling rules for this trunk
5)
Add that outgoing rule into existed dial plan.
Click Save and Apply Changes.
8. How to make basic communication between the analog cards with IPPBX?
In order to make basic communication between the analog card with IPPBX, Follow the below
steps.
1)
Set up the SIP trunk between the analog card and IPPBX.
2)
Assign extension numbers for FXS ports
3)
Create an outbound rule for the SIP trunk and add it to dial plan
4)
Set up the incoming calling rule for that SIP trunk and route the call to one of the FXS
ports.
10. Explain Trunks Bridging (Sending call from one Trunk to another Trunk)?
Trunks bridging means, if the call is coming from one trunk then we can send the call directly to
another trunk.
Scenario No 1: Call is coming from FXO trunk and sending to SIP trunk
1)
Create an incoming calling rule for FXO trunk Pattern as _X.
2)
You can set the default option for a time interval
3)
Destination will be the SIP trunk.
4)
Add the FXO line number in the “Number “field.
Scenario No 2: Call is coming from SIP trunk and sending to SIP trunk
