background image

 

 
 

117 

This section is intended to make thoroughly clear what is believed to be a 
consequence of the rest of this License. 

 
8.

 

If the distribution and/or use of the Program is restricted in certain countries 

either by patents or by copyrighted interfaces, the original copyright holder 
who places the Program under this License may add an explicit geographical 

distribution limitation excluding those countries, so that distribution is 
permitted only in or among countries not thus excluded.  In such case, this 

License incorporates the limitation as if written in the body of this License. 

 
9.

 

The Free Software Foundation may publish revised and/or new versions of the 

General Public License from time to time.  Such new versions will be similar in 
spirit to the present version, but may differ in detail to address new problems 

or concerns. 

 

Each version is given a distinguishing version number.  If the Program 
specifies a version number of this License which applies to it and "any later 

version", you have the option of following the terms and conditions either of 
that version or of any later version published by the Free Software Foundation.  
If the Program does not specify a version number of this License, you may 

choose any version ever published by the Free Software Foundation. 

 

10.

 

If you wish to incorporate parts of the Program into other free programs 
whose distribution conditions are different, write to the author to ask for 

permission.  For software which is copyrighted by the Free Software 
Foundation, write to the Free Software Foundation; we sometimes make 

exceptions for this.  Our decision will be guided by the two goals of preserving 
the free status of all derivatives of our free software and of promoting the 
sharing and reuse of software generally. 

 

NO WARRANTY 

 
11.

 

BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO 

WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE 
LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT 

HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" 
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, 
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE 
RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH 

YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF 
ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 

 
12.

 

IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN 

WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY 
MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE 
LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, 

INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR 
INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS 

OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED 
BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE 

WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY 
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 

 

END OF TERMS AND CONDITIONS 

 

 

Содержание ALL6800























































































































Отзывы: