Allnet ALL2295, Руководство пользователя

Страница: 14 / 141

Full HD Vandal Proof IP Outdoor Dome Camera Version 1.0
14
Please read the instructions provided in this chapter thoroughly before
installing the Full HD Multi-Res Vandal Proof IP Dome Camera.
Power Connection
Make sure the camera
’s power cable is correctly and firmly connected; refer
to the pin definition table in section 2.2 Camera
’s Connectors
. If using
Power over Ethernet (PoE), make sure Power Sourcing Equipment (PSE) is
in use in the network.
Ethernet Cable Connection
Use of Category 5 Ethernet cable is recommended for network connection;
to have best transmission quality, cable length shall not exceed 100 meters.
Connect one end of the Ethernet cable to the RJ-45 connector of the IP
Dome Camera, and the other end of the cable to the network switch or PC.
NOTE: In some cases, you may need use an Ethernet crossover
cable when connecting the IP Dome Camera directly to the PC.
Check the status of the link indicator and activity indicator LEDs; if the LEDs
are unlit, please check LAN connection.
Green Link Light indicates good network
connection.
Orange Activity Light flashes for network activity
indication.
AUTO
IRIS
1 2 3 4
I/O
NETWORK
DC12V
LINE LINE IN
MIC IN OUT
VIDEO
DC
RESET