Allnet ALL-WAP0305AC Скачать руководство пользователя страница 50

Страница: 50 / 110

Advanced Settings

SNMP Settings

Location:

Specifies the location of the device.

This page allows you to assign the Contact Details, Location, Community Name, and Trap Settings for a Simple Network

Community Name (Read Only):

Specifies the password

for the SNMP community for read only access.

Management Protocol (SNMP). SNMP is a networking management protocol used to monitor network
attached

Community Name (Read/Write):

Specifies the password

for the SNMP community with read/write access.

devices. SNMP allows messages (called protocol data units) to be sent to various parts of the network. Upon receiving

Trap Destination Address:

Specifies the IP address of the

computer that will receive the SNMP traps.

these messages, SNMP compatible devices (called agents)
returns the data stored in their Management Information

Trap Destination Community Name:

Specifies the

password for the SNMP trap community.

SNMPv3:

Enables or disables the SNMPv3 feature.

User Name:

Specifies the username for SNMPv3.

Auth Protocol

: Selects the authentication protocol type:

MDS or SHA.

Auth Key:

Specifies the authentication key.

Priv Protocol:

Selects the privacy protocol type: DES.

Priv Key:

Specifies the privacy key for privacy.

SNMP Enable/Disable

: Enables or disables the SNMP

feature.

Engine ID:

Specifies the engine ID for SNMPv3.

Apply Save:

Click

Apply Save

to apply the changes.

Contact:

Specifies the contact details of the device.

Содержание ALL-WAP0305AC















































































































Результаты поиска

Содержание ALL-WAP0305AC

Отзывы:

Бренды по названию

Популярные бренды

Allnet ALL-WAP0305AC, Руководство пользователя

Результаты поиска

Содержание ALL-WAP0305AC

Отзывы:

Бренды по названию

Популярные бренды