Allnet ALL-WAP0305AC, Руководство пользователя

Страница: 45 / 110

WDS Link Settings 2.4 GHz/5 GHz WDS Link Settings
Using the WDS (Wireless Distribution System) feature will
allow a network administrator or installer to connect
to
Access Points wirelessly. Doing so will extend the wired
infrastructure to locations where cabling is not possible or
inefficient to implement.
Note: Compatibility between different brands
and models of Access Points is not
guaranteed. It is
recommended that the WDS network be created using
the same models for maximum compatibility.
Also note: All Access Points in the WDS network need to
use the same Channel and Security settings.
Security: Select None or AES from the drop-down list.
To create a WDS network, please enter the MAC addresses of the Access Points that you want included in the WDS.
AES Passphrase: Enter the Key Values you wish to use. Other Access Points must use the same Key to establish a
There can be a maximum of four Access Points.
Note: Only applicable in WDS AP and WDS Bridge modes.
WDS link.
MAC Address:
Enter the Access Point’s MAC address to
where you want to extend the wireless area.
Mode : Select to disable or enable from the drop-down list.
Save: Click Save to confirm the changes.