Page 2
ALL 3000RFMk2 INTERNET REMOTE CONTROL
Front Panel
Rear View
Display LED´s
Can be programmed by
the user to show status
information.
Transmitter Status
Lights up when the
ALL 3000RFMk2 transmitter
is working.
Does also blink during
program execution.
Package Contents
- ALL 3000RFMk2 Internet Remote Control
- external power supply
- Manual
Factory
Reset
If this button is pressed
during power-up, the
ALL3000RFMk2 resets all
parameters to their
initial values.
Success is shown
via a short blinking
LED pattern.
Link LED
is lit if the
ALL3000RFMk2
is connected
to a hub or
switch.
Network
Activity
blinks if there
is traffic on
the network
interface.
Ethernet
Connection to
hub or switch
Power
Connect the
power supply
here.
(5...9 V DC)
