Allmatic HELIOS KAIROS Скачать руководство пользователя страница 16

ITA

ENG

FRA

ESP

DEU

POR

16/44

6-1621090             rev3             16/03/2016

ENG

Compa

ble fr

om fi

 rm

w

ar

e v

er

sion HELKA03

6

6.1 Control unit behaviour

HELIOS  KAIROS 

control  unit  drives  motors  with  internal  limit  switches  with  an  admi# ed  opening  ! me  of  7 

minutes.
In case in which the awning is stopped for the interven! on of a limit switch, the control unit remains on the 
state of opening awning un! l the reaching of the 7 minutes. In this interval of ! me 2 “CLOSE” commands will 
be necessary to bring the awning on closing (because it will be necessary to pass for the STOP state).
At the same way, in case in which the awning would be opened and the control unit would fi nd itself in the state 
of “STOP”, an order of closing would draw back the awning for a ! me determined by the interven! on of the 
limit switches of the motor. Despite the awning has been totally closed, the control unit will con! nue on the 
closing state un! l the reaching of the 7 minutes. For this reason in this interval of ! me 2 “OPEN” commands 
will be necessary to bring the awning on opening (because it will be necessary to pass for the STOP state).In 
conclusion, it is necessary to keep in mind that the condi! on of open/close awning for the control unit do not 
always correspond to the real condi! on of the open/close awning.

NOTA: in case that the control unit is on the closing posi! on and, through the manual override, the awning is 

brought to the opening posi! on, an interven! on of the sensors (wind, light, rain, snow) will not make close 

the awning as, the control unit is s! ll under the closing posi! on.

6.2 Control unit behaviour with light sensor enabled 

The control HELIOS KAIROS, with the use of the light sensor, becomes fully automa! c and opens and closes 
depending on the light threshold set on sensor. The light sensor has priority over user commands (transmi# ers 
and cabled inputs). 

The sensor status light is visible through the green LED of the control unit:
• 

Off  status: light below the set threshold (awning closed).

•  Blinking: light above the set threshold (open awning).

The state of the control unit is visible through the yellow LED of the control unit:
• 

1 fl ash per second: temporary exclusion of the sensors (see 8.2).

•  1 blink every 2 seconds: winter mode (see 8.3).
•  Flashing quickly: learning of automa! c opening posi! on (see 8.1).

6.3 Control unit behaviour during alarm (wind, rain, snow, disconnec! on) 

The 

presence of an alarm will immediately close the awning and block the opera! on of the transmi# ers and 

cabled inputs for 7 minutes a& er the fi nishing of the alarm. A slow fl ashing red LED indicates to the user the 
alarm condi! on.

The de

tec! on of the snow (snow alarm) occurs in diff erent ways depending on the type of sensor:

•  Sensor powered from the mains (KAIROS): presence of rain and temperature below 4°C (sensor with heater).
•  Sensor  powered  by  photovoltaic  panel  (KAIROS  SA):  only  temperature  lower  than  2°C  regardless  of  the 

presence of rain (sensor not equipped with heater).

•  AXEM sensor: inclina! on of the awning more than 2° compared to the memorized posi! on.

A rapid fl ashing of the red LED indicates a disconnec! on alarm of the sensors, the awning can be ac! vated only 
by disabling all sensors (DIP 5, 6, 7, 8 OFF); in this case, however, the awning will not be closed by the presence 
of wind, rain or snow alarm.

6.4 Con

trol unit behaviour a" er power failure 

The  control  unit  a& er  a  power  failure,  returns  to  automa! c  opera! on,  star! ng  as  from  the  posi! on  of  the 

awning before the blackout, data, se'

  ng, transmi# ers and sensors will remain memorized.

SETTINGS

Содержание HELIOS KAIROS













































Отзывы: