Allmand Maxi-Lite II, Руководство по установке

Страница: 14 / 44

14 www.allmand.com
Zettler Relay
Disconnection Detail
20
DD
Zettler Relay 2
21
EE
FF
24. Cut off and discard the female spade terminal from
the wire that was connected to the Zettler relay. Strip
off the appropriate amount of wire insulation and install
wire ( EE , Figure 21) into a 3 pin lever lock ( FF , Figure
21, Ref. 10) from the kit contents.
22
GG HH
25. From the kit contents, locate and select they yellow 16
AWG wire ( GG , Figure 22, Ref. 3). Cut the yellow 16
AWG wire in half, and strip the ends of the cut wires.
On each of the cut wires crimp a blue fork terminal
( HH , Figure 22, Ref. 8) on one of the ends.
23a
725 Relay 2
I I
725 Relay 1
I I
26. Install the fork terminal end of each yellow wire ( II ,
Figure 19a-b) on DC post 2 of 725 light relay 1 and 2.
Then, install the bare wire ends of the two black wires
into the open ports of the 3 port lever lock ( JJ , Figure
19a-b) that was installed in Step 20.
JJ
Not for
Reproduction