Allmand ECLIPSE 2220/SE Series, Руководство оператора и каталог запасных частей

Страница: 12 / 41

12
TROUBLESHOOTING
The ALLMAND ECLIPSE 2220/SE SERIES SOLAR ASSIST ARROWBOARD is a highly reliable
and trouble free piece of equipment. However, should a rare problem occur, the following list of trouble-
shooting procedures will assist the operator in locating and correcting the source of the problem.
PROBLEM PROCEDURE
ƒ Display not functioning properly Check wiring, lamps and
or not functioning at all . connections. Replace lamp
elements or controller if necessary
Check batteries, re-charge or
replace if necessary.
ƒ No power to system. Check circuit breakers on
controller. Allow to automatically
reset if tripped. Check wiring.
Replace controller.
ƒ Operational time is less than desired. Check battery condition. Charge
batteries with heavy-duty AC charger. Use
hydrometer to ensure that batteries are
fully charged before putting unit into
service. (See
BATTERY MAINTENANCE
section). Check solar panels. (See
ARRAY MAINTENANCE section.)
ƒ LVD lamp illuminated or system shut down. Charge batteries using properly sized AC
charger until voltmeter or hydrometer
indicates batteries are fully charged.
ƒ Batteries will not fully charge. Check battery condition . ( See BATTERY
MAINTENANCE section .) Replace if
necessary.
NOTE: If it has been determined that the controller is defective it may be returned freight
prepaid to:
ECLIPSE ELECTRONIC REPAIR CENTER
1903 BARRETT DRIVE
TROY, MI 48084
PHONE: (248) 362-0544
Repair (or replacement at our option) and return will be done on a timely basis to minimize downtime.
Out-of-warranty units will be repaired on a time and materials basis, usually within two working days of
receipt. Be certain to specify the problem and include complete return information (including zip code,
phone/FAX numbers, contact person, purchase order number, etc.) with the failed unit.