Configuration of the camera
STINGRAY Technical Manual
V4.4.2
331
Parameter-List Update
The parameter list is an array of address/data pairs which can be sent to the
camera in a single bus cycle.
Dependant on the parameter update mode the address/data pairs may
become active one by one or after the processing of the complete parameter
list. A parameter list may look like follows (the description is for your con-
venience):
Register
Name
Field
Bit
Description
0xF1100000
PARAMLIST_INFO
Presence_Inq
[0]
Indicates presence of this feature
(read only)
---
[1..15]
Reserved
BufferSize
[16..31]
Size of parameter list buffer in
bytes
0xF1101000
...
0xF1101nnn
PARAMLIST_BUFFER
Table 156: Advanced register:
Parameter-List Update
: parameter list
Address offset
Data quadlet
Description
0xF0F00608
0xE0000000
Set video format 7
0xF0F00604
0x00000000
Set video mode 0
0xF0F08008
0x00000000
Set image position
0xF0F0800C
0x028001E0
Set image size
0xF0F08044
0x04840484
Set BytePerPacket value
0xF0F0080C
0x80000100
Set shutter to 0x100
0xF0F00820
0x80000080
Set gain to 0x80
Table 157: Example:
parameter list
Note
•
The PARAMLIST_BUFFER shares the memory with the
GPDATA_BUFFER. Therefore it is not possible to use
both features at the same time.
•
Not all CSRs or features of a particular camera model
can be used with the parameter list feature.