Configuration of the camera
STINGRAY Technical Manual
V4.4.2
314
3.
Poll the SHDG_CTRL register until the
Busy
and
BuildImage
flags are
reset automatically.
The maximum value of GrabCount depends on the camera type and the num-
ber of available image buffers. GrabCount is automatically adjusted to a
power of two.
Do not poll the SHDG_CTRL register too often, while automatic generation is
in progress. Each poll delays the process of generating the shading image.
An optimal poll interval time is 500 ms.
Memory channel error codes
ID
Error description
0x00
No error
0x01
Memory detection error
0x02
Memory size error
0x03
Memory erase error
0x04
Memory write error
0x05
Memory header write error
0x0F
Memory channel out of range
Table 140:
Memory channel
error description