Camera interfaces
172
Manta Technical Manual V7.7.0
Camera I/O connector pin assignment
(including PoE)
Read all Notes and Cautions in the
GigE Installation Manual
before using the
Hirose I/O port.
Hirose connector
The cable side Hirose 12-pin female connector is available for purchase from Allied
Vision (order code: K7600040). The general purpose I/O port uses a Hirose HR10-
10R-12PA(73) connector on the camera side. The mating cable connector is Hirose
HR10A-10P-12S.
Pin
Signal
Direction
Level
Description
1
Camera GND
In
GND for RS232 and
external power
Ground for camera power supply
and RS232
2
Camera Power
In
8 to 30 VDC
Camera power supply
3
Video Type
Auto Iris Out
Out
---
Video type auto iris (
firmware
version 01.44)
4
In 1
In
Standard and PoE models:
U
in
(high) = 3 to 24 V
up to 36 V with external
resistor of 3.3 k
in series
U
in
(low) = 0 to 1.0 V
Opto-isolated input 1 (SyncIn1)
5
---
---
---
---
6
Out 1
Out
Open emitter,
maximum 10 mA
Opto-isolated output 1
(SyncOut1)
7
Isolated In GND
In/Out
---
Isolated input signal ground
8
RxD RS232
In
RS232
Terminal receive data
Table 76: I/O connector pin assignment
1
2
3
4
5 6
7
8
9
10
12
11