Installing the camera
117
Alvium G1 User Guide V1.1.1
Mounting the camera
Bottom or top mounting
Especially for dynamic applications with high acceleration, mount the camera using
the bottom mounting threads in addition.
The maximum torque value applies only if the entire thread engagement is
used.
For other values, see
Adapting maximum torque values
on page 118. For
technical drawings, see
1. As shown in
Figure 43
, mount the camera to the base using suitable M3 screws
for mounting thread a: At 0.51 Nm maximum torque for a thread engagement
(C) of 2.2 mm between screws and mounting threads.
CAUTION
Injury by falling cameras or lenses
A falling camera or lens can cause injury.
• Ensure proper mounting of cameras and lenses, especially for dynamic
applications.
• Mount cameras as described in the instructions.
• Always make sure the mounting threads are intact.
• Fasten screws with maximum torque, using the entire thread engagement. For
Adapting maximum torque values
• We recommend you to apply thread locking.
• Use a lens support for heavy lenses.
Figure 43: Mounting threads bottom and top (a)
13
±0.1
20
±0.1
M3 - 2.5
(2x)
41.3
a
a
Detail a:
DϯљϮ͘Ϯљϰ͘Ϭ
сDϯͮсϬ͘ϯͮсϮ͘Ϯͮсϰ͘Ϭ
D
B
C
A