manualshive.com logo in svg

Allied Vision Technologies Prosilica GC1290, Техническое руководство

Поделиться
Скачать
Allied Vision Technologies Prosilica GC1290 Скачать руководство пользователя страница 5

 

GC1290 Technical Manual

 

Page 1 

Introduction 

The GC1290 series of cameras are very sensitive, 30 frames per second, megapixel, Gigabit 
Ethernet

 

cameras based on the Sony ICX445ALA and ICX445AQA, EXview HAD CCD sensors.   

Precautions 

 

READ INSTALLATION GUIDE CAREFULLY. 

This document contains specific information which is necessary for the correct operation and 
treatment of this product. 

 

DO NOT OPEN THE CAMERA.  WARRANTY IS VOID IF CAMERA IS OPENED. 

This camera contains sensitive components which can be damaged if handled incorrectly. 

 

KEEP SHIPPING MATERIAL. 

Poor packaging of this product can cause damage during shipping. 

 

VERIFY ALL EXTERNAL CONNECTIONS. 

Verify all external connections in terms of voltage levels, power requirements, voltage polarity, 
and signal integrity prior to powering this device. 

 

CLEANING. 

This product can be damaged by some volatile cleaning agents.  Avoid cleaning the image sensor 
unless absolutely necessary.  Please see instructions on sensor cleaning in this document. 

 

DO NOT EXCEED ENVIRONMENTAL SPECIFICATIONS. 

See environmental specifications limits in the Specifications section of this document. 

Warranty 

AVT provides a 2 year warranty which covers the replacement and repair of all AVT parts which are 
found to be defective in the normal use of this product.  AVT will not warranty parts which have 
been damaged through the obvious misuse of this product.  

Содержание Prosilica GC1290

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды