Camera interfaces
MANTA Technical Manual
V4.1.0
58
Gigabit Ethernet port
The Gigabit Ethernet port conforms to the IEEE 802.3 1000BASE-T standard for
Gigabit Ethernet over copper. We recommend using Category 5e or Category 6
compatible cabling and connectors for best performance.
Note
•
Cable lengths up to 100 m are supported.
•
The 8-pin RJ-45 jack has the pin assignment according to
the Ethernet standard (IEEE 802.3 1000BASE-T).
•
For cameras that are
PoE
capable, the GigE connector can
be used to provide power to the camera.
•
If you supply power via
PoE
, the power must comply with
IEEE
802.3at
.
•
If both interfaces are used for power (I/O and GigE con-
nector via
PoE
), the camera will only use the power from
the I/O connector.
PoE and non PoE
•
How can I distinguish between PoE capable cameras and
cameras that are not PoE capable?
–
PoE
capable cameras have the letters
PoE
written on
the camera‘s label on the back side and the bottom
side of the camera.
–
PoE
capable cameras have the
GigE jack upside
down
.
Exception
Manta G-145-30fps and Manta G-201-30fps (non PoE)
•
... have same I/O pin assignment (input circuits and
voltage range), power LED and upside down PoE plug as
PoE models
Accessories
•
Cables with screw-lock connectors are available from AVT:
http://www.alliedvisiontec.com/emea/products/
accessories/gige-accessories.html
•
Ask your local dealer for more details.