Allied Telesis x600-24Ts, Руководство по установке

Страница: 37 / 112

x600 Series Layer 3 Gigabit Ethernet Switches Installation Guide
37
STACK LEDs
The STACK LEDs reflect the link status of the two stack ports on the
AT-StackXG Stacking Module and if the switch is the master unit of the
stack. To locate the STACK LEDs for any of the non-PoE x600 switches,
see Figure 18. To locate the STACK LEDs for either the x600-24Ts-POE
or x600-24Ts-POE+ switch, see Figure 19.
Figure 18. Non PoE Switch STACK LEDs
Figure 19. x600-24Ts-POE and x600-24Ts-POE+ STACK LEDs
These LEDs remain off if the module or the stack cables are not installed.
See Table 7 on page 38 for a description of the STACK LEDs.
1623
L/A
PRES
MSTR
L/A 1
2
STACK
1600
L
P
P
L L/A
M S TR
L/A
1
2
S TACK