Allied Telesis TQ5403 Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 82

Allied Telesis TQ5403 Скачать руководство пользователя страница 35

TQ5403 and TQm5403 Wireless Access Points Installation Guide

35

Warning

This equipment shall be installed in a Restricted Access location.



E45

Warning

FCC Caution: Any changes or modifications not expressly approved
by the party responsible for compliance could void the user's
authority to operate this equipment.



E80

Note

The access point must be powered by:

1. A UL listed external AC/DC power supply suitable for use at
Tma 45

o

C, a maximum operating altitude of 3000 m or higher, and

whose output meets separated extra-low voltage (SELV), limited
power sources (LPSs) and is rated 12 VDC, 2.0 A,

OR

2. By Power over Ethernet through a UL listed ITE. Refer to
Table 6, “External AC/DC Adapter Specifications” on page 58.

Caution

Air vents must not be blocked and must have free access to the
room ambient air for cooling.



E6

Warning

An operational unit can be hot. Exercise caution when handling with
unprotected hands.

Warning

Operating Temperature. This product is designed for a maximum
ambient temperature of 45°C (122° F)



E7.

Warning

To reduce the risk of electric shock, the PoE port on this product
must not connect to cabling that is routed outside the building where
this device is located.



E40

«
...
33
34
35
36
37
...
»

Содержание TQ5403



















































































Отзывы:

Нет отзывов