Allied Telesis TQ5403 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 82

Allied Telesis TQ5403 Скачать руководство пользователя страница 3

TQ5403 and TQm5403 Wireless Access Points Installation Guide

3

Electrical Safety and Emissions
Standards

This product meets the following standards:



“Federal Communications Commission Interference Statement”



“European Union Restriction of the Use of Certain Hazardous Substances (RoHS) in Electrical
and Electronic Equipment” on page 4



“Safety and Electromagnetic Emissions” on page 4



“Translated Safety Statements” on page 8

Federal Communications Commission Interference Statement

Declaration of Conformity

Manufacturer Name:

Allied Telesis

Declares that the product:

802.11ac wave2 2x2 Tri-radio 2.4G/5G/5G wireless AP

Model Number:

AT-TQ5403 and AT-TQm5403

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one of the following
measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

«
1
2
3
4
5
...
»

Содержание TQ5403



















































































Отзывы:

Нет отзывов