Allied Telesis MIB Structure (SIP/MGCP/NCS), Справочное руководство

Страница: 28 / 80

Chapter 5 - gatewayGroup Parameters MIB Reference Manual - Provisioning MIB
VP500 Communication Unit 18
gatewayPermLo-
calSameACGroup
The following parameters allow you to set gateway permissions when
making a Local Call in the same Area Code.
gatewayPermLo-
calDiffACGroup
The following parameters allow you to set gateway permissions when
making a Local Call in a different Area Code.
gatewayPortnRedirectEnable R/W Enable the redirection of incoming calls on port #n used in FXO
mode.
0 = Disable (IP dial tone)
1 = Enable (Redirected to address
gatewayPortxRedirectToAddress )
Default Value : 0
Yes
gatewayPortnRedirectToAddress R/W Address to which incoming calls on port #n are redirected.
Default Value :
Yes
Table 17: Gateway Port n Parameters (Continued)
Name Access Description Dynamic
Table 18: Gateway Perm Local Same AC Parameters
Name Access Description Dynamic
gatewayPermLocalSameACPrefix R/W Prefix that must be dialed before the destination number. The
field is empty when no prefix is required (the destination call is
local with the same area code as
countryAreaCode ).
Default Value :
Yes
gatewayPermLocalSameACAllowed R/W Semi-colon separated list of numbers allowed to be called on a
port used in FXO mode (the destination call is local with the same
area code as
countryAreaCode ).
Default Value :
Yes
gatewayPermLocalSameACAllowAll R/W Select which numbers are allowed to be called on a port used in
FXO mode.
0 = Only numbers in field
gatewayPermLocalSameACAllowed
1 = All numbers (The destination call is local with the same
area code as
countryAreaCode )
Default Value : 0
Yes
Table 19: Gateway Perm Local Diff AC Parameters
Name Access Description Dynamic
gatewayPermLocalDiffACPrefix R/W Prefix that must be dialed before the destination number. The
field is empty when no prefix is required (the destination call is
local with a different area code than
countryAreaCode ).
Default Value :
Yes
gatewayPermLocalDiffACAllowed R/W Semi-colon separated list of numbers allowed to be called on port
used in FXO mode (the destination call is local with a different
area code than
countryAreaCode ).
Default Value :
Yes