Allied Telesis DNC10 Series, Инструкция по установке и эксплуатации

Страница: 85 / 118

DNC10 Series Network Interface Cards Installation and User’s Guide
85
Recv Segment Coalescing (IPv4)
When receiving data, the miniport driver, NDIS, and TCP/IP must all look
at each segment's header information separately. When large amounts of
data are being received, this creates a large amount of overhead. Receive
segment coalescing (RSC) reduces this overhead by coalescing a
sequence of received segments and passing them to the host TCP/IP
stack in one operation, so that NDIS and TCP/IP need only look at one
header for the entire sequence.
To enable or disable the Receive Segment Coalescing (IPv4) feature, do
the following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 58.
2. Select Receive Segment Coalescing (IPv4) in the Property box.
The Receive Segment Coalescing (IPv4) page is displayed as shown
in Figure 42.
Figure 42. Receive Segment Coalescing (IPv4) Page
3. Select one of the following options:

Enabled — RSC is enabled. This is the default setting.

Disabled — RSC is disabled.