Overview
14
The network itself may be faulty. This can usually be checked
independently of the bridge by establishing communication between two
computers that are directly attached to the network.
Finally, you should check that the bridge configuration matches the
network attachments being used. Turn off the power and remove the
power cord from the bridge. Remove the cover and inspect the intemal
configuration. Refer to the earlier section on bridge configuration for the
correct settings and make sure that:
1.
All shunts are firmly installed in the correct locations.
2.
The thin Ethernet transformers are inshiled in.the correct locations.
3.
The thin Ethernet transformers do not have any bent pins.
4.
The thin Ethernet transformers have all the pins inserted in the socket.
5.
The thin Ethernet transformers are not shifted in the socket.
