CentreCOM 3600 Series Hub/Repeaters
13
The
x
in the “suffix” column above indicates the power type, where:
❑
“1” is a universal power supply with a U.S.A.-style power cord.
❑
“2” is a universal power supply without power cord (export model).
For example:
❑
If you were to order an AT-3606F-18 (i.e.
x =
1) hub with 6 fiber
optic station ports, it would be provided with a U.S.A.-style power
cord and a BNC (10BASE2) network interconnect port.
❑
If you were to order an AT-3606F-28 (i.e.
x
= 2) hub with 6 fiber
optic station ports, however, it would be provided with a BNC
(10BASE2) network interconnect port but
without
a power cord.
Appliqué
Installation
Procedures
Appliqués attach to any AT-3600 Series hub with management capability
through the front panel appliqué port. This port is located to the left of the
power receptacle and the RS232 terminal port, as shown in Figure 9.
To remove an AUI appliqué
1.
Detach the AUI appliqué assembly installed on the front panel
appliqué port. Loosen the two M3x6 flat-head screws to the far right
and left on the connector plate, shown in Figure 10.
Figure 9:
AT-3612TR Front and
Back Panels
Figure 10:
AUI Appliqué
Assembly
Front
Back
Appliqué
port
RS232
Power
receptacle
port
M3x6 flat-head screws
Connector
plate
AUI connector
