AT-WNU300N IEEE802.11b/g/n 2T2R Wireless Fast USB Adapter User Manual
27
1
2
3
4
Figure 39: WPS Button on Wireless Router
2.
Push WPS button on AT-WNU300N.
Mbps
Figure 40: WPS Button
3.
Wait seconds for the WPS connection. As the connection successes, the network will be shown in the
WPS Profile list.
Figure 41: WPS Successfully
Note:
After pushing WPS button on the wireless AP, you need to click on “PBC” button in 120
seconds. Otherwise you need to perform the procedure from step 1.
Push Button Connection (PBC)
If the wireless AP does not provide hardware WPS button, you need to apply WPS in the utility. The
interface and terminology might be dissimilar in different models. Please refer to their manuals for the
configuration.
1.
In wireless AP utility, push PBC button to generate WPS signal.