
22
AT-WNU300N - IEEE802.11b/g/n 2T2R Wireless Fast USB Adapter - User Manual
Figure 24: Configure Profile
3.
In “Auth.\Encry.” tab, confirm that the Authentication and Encryption setting is corresponding to the
wireless AP. Input the Key and then click on “OK” to apply the settings.
Figure 25: Configure Auth./Encry.Chin
4.
In “Profile” tab, select the profile you want to connect to, and then click on “Activate”.
Figure 26: Active a WEP Network
Note:
Hex code uses 0-9, a-f characters; ASCII code uses 0-9, a-z characters. All settings must
be exactly the same with the wireless AP; otherwise it will result in a failure.
Connect to a WPA-PSK/WPA2-PSK Network
Please perform the following procedure to connect to a WPA-PSK/WPA2-PSK network.
1.
In “Network” tab, select the AP you want to connect to, and then click on “Add to Profile”.