Allied Telesis AT-WCP201G, Руководство по установке, Страница: 62 / 73

Chapter 3: Microsoft Windows XP
62
The Internet Protocol (TCP/IP) Properties window is shown in Figure
39.
Figure 39. Internet Protocol (TCP/IP) Properties Window
5. If you want the adapter to obtain its IP address, subnet mask, and
default gateway from a DHCP server on your network, select Obtain
an IP address automatically . If you want to set these parameters
manually, select Use the following IP address and enter the
information into the fields.
6. If your network has a domain name service, which converts domain
names into IP addresses, and you want the computer to obtain the IP
address of the domain name server from a DHCP server, select
Obtain DNS server address automatically . To enter the IP address
of a domain name server manually, select Use the following DNS
server addresses and enter the IP address in the field. You can enter
up to two IP addresses of domain name servers. The alternate DNS
server address is used only if the server specified as the preferred
DNS server does not respond.
7. Click OK to close the Internet Protocol (TCP/IP) Properties window.
8. Click OK to close the Wireless Network Connection Properties
window.
This completes the procedure for configuring the IP address and
subnet mask of the wireless adapter card. You are now ready to
configure the adapter’s security system using the Wireless Adapter
Configuration program.