Allied Telesis AT-WCP201G, Руководство по установке, Страница: 28 / 73

Chapter 1: Installing the AT-WCP201G Wireless Adapter Card
28
Verifying the Driver Installation
To verify the installation of the driver into the Microsoft Windows operating
system, perform the following procedure:
1. Open the Control Panel .
2. Double-click on System .
The System Properties window with the General tab is shown in Figure
9 on page 23.
3. Click the Hardware tab.
The Hardware tab is shown in Figure 10 on page 24.
4. Click Device Manager .
The Device Manager window is shown in Figure 11 on page 25.
5. Expand Network adapters by either double-clicking on it or by clicking
once on the expansion box next to it.
The selection expands to display the network adapter cards installed in
the system. An example is shown in Figure 12 on page 25.
6. Double-click on Allied Telesyn AT-WCP201G Wireless Adapter .
The Properties window of the adapter is shown in Figure 13 on page
26.
7. Verify that the Device Status contains the following: “The device is
working properly.”