Port Mirroring
42
5. Depending on your selection in Step 4, a screen similar to Figure 16
will be displayed.
Figure 16 Source Port TX/RX Configure (RX Data) Menu
6. Type 1 to select Mirror Filter. The following prompt is displayed:
Enter new filter (A-All Frames, D-Dest Addr,
S-Source Addr):
7. Type your selection and press <Enter>.
8. Type 2 to select Mirror MAC Address. The following prompt is
displayed:
Mirror Frames with MAC Address =
9. Enter the MAC address and press <Enter>.
10. Type 3 to select Mirror Divider.
Note
If you selected Mirror All Frames under Mirror Filter, you do not
need to change this parameter.
The following prompt is displayed:
Select Divider value (2-1023, 1 to Disable) ->
