Allied Telesis AT-MS201, Руководство по установке, Страница: 26 / 40

Installation and Troubleshooting
10
Note
Electrostatic Discharge Precautions. Static electricity can
damage electronic components of a computer or optional equipment.
To prevent electrostatic damage, observe the following precautions:
Avoid hand contact by transporting and storing products in static-
safe containers. Keep electro-sensitive parts in their containers until
they arrive at a static-free work place. Place parts on a grounded
surface before removing them from their containers. Avoid touching
pins, leads, or circuitry and always be properly grounded when
touching a static-sensitive component or assembly.
Note
For cable specifications and requirements, see the section titled,
“Cable Specifications and Requirements” in Appendix A.
Installation
To install the switch, do the following:
1. Remove all equipment from the packaging box and store the box and
packaging materials in a safe place.
2. Attach the power cord.
3. Make sure that the green POWER LED is lit.
4. Plug the 10/100Base-TX RJ45 end station cables into the RJ-45 Port 2.
5. Plug the 100Base-FX (ST/SC) fiber cable into Port 1.
Setting the MDI/MDI-X Switch
1. If you are making a direct connection to workstations using straight-
through cable, set the MDI/MDI-X switch to the MDI-X. position. (MDI-X
is the default position.)
If you are connecting the switch to a hub or switch with a straight-through
cable, set the MDI/MDI-X switch to the MDI position.
HUB (MDI-X) NIC (MDI)
MDI-X MDI