Allied Telesis AT-MMC6005, Руководство по установке

Страница: 36 / 58

Installation
36
Selecting a Site for the Media Converter
The AT-MMC6000 Series Media Converter may be individually installed
on a desk top, mounted on a wall or rack mounted.
When mounting the unit to a wall, you must use the AT-MMCWLMT Kit
which is not included with the AT-MMC6000 Series Media Converter.
It can also be installed in a rack-mounted environment by first installing the
media converter in an AT-MMCR18 rack mount chassis. If you plan to
install your AT-MMC6000 Series Media Converter within a rack, refer to
the AT-MMCR18 Rack Mount Chassis Installation Guide for instructions
for mounting the unit within the chassis and applying power to the chassis
and media converter.
Observe the following requirements when choosing a site to install your
media converter on either a desktop or a wall.

If you are installing the media converter on a table, be sure that the
table is level and secure.
 The power outlet for the media converter should be located near
the unit and should be easily accessible.
 The site should provide for easy access to the ports on the front of
the media converter. This will make it easy for you to connect and
disconnect cables, as well as view the LEDs.

To allow proper cooling of the media converter, air flow around the
unit and through its vents on the side should not be restricted.
 Do not place objects on top of the media converter.
 Do not expose the media converter to moisture or water.
 Make sure that the site is a dust-free environment.