Allied Telesis AT-MMC1000/SP, Руководство по установке

Страница: 49 / 50

AT-MMC1000 Mini Switching Media Converter Installation Guide
49
6. Use scotch tape to attach the template on the wall.
7. Pre-drill four 3/16” (5mm) holes at the locations on the templates as
shown in Figure 17.
Figure 17. Placing the Template on the Wall
8. Remove the template from the wall.
9. If you are installing the media converter on a concrete wall, install four
plastic anchors included with AT - MMCWLMT Kit into the concrete wall,
at the holes you drilled in the previous step.
If you are installing the media converter on a wood wall, skip this step
and go to step 10.
10. Secure the media converter unit to the wall using four screws as
shown in Figure 18 on page 50.

On a concrete wall: use the 3.5x20mm self-tapping screws
included in the kit.

On a wood wall: use the 4x32mm wood screws ( not included).