Mounting Installation
Wall-Mount Plate Fixing
16
AT-IMC100T/SCSM and AT-IMC100T/SCMM Fast Ethernet Industrial Media Converters
3.1.5 Check the DIN-Rail clip is tightly fixed on the DIN rail.
3.1.6 To remove the industrial switch from the track, reverse the steps above.
3.2 Wall-Mount Plate Fixing
Follow the steps below to mount the industrial switch with the wall mount plates included.
Note:
To remove the DIN-Rail clip from the industrial switch, unscrew the screws to remove the DIN-Rail clip.
3.2.1 Place the wall-mount plates on the rear panel of the industrial switch.
3.2.2 Use the screws to secure the wall-mount plates on the industrial switch.
3.2.3 Use the hook holes at the corners of the wall-mount plates to hang the industrial switch on the wall.
3.2.4 To remove the wall-mount plates, reverse the steps above.
FIGURE 3-4
Wall-Mount Plate Fixing
