Mounting Installation
DIN-Rail Mounting
14
AT-IMC100T/SCSM and AT-IMC100T/SCMM Fast Ethernet Industrial Media Converters
3. Mounting Installation
3.1 DIN-Rail Mounting
The DIN-rail clip is screwed on the industrial switch when out of factory. If not, please refer to the following steps and figure
to secure the DIN-rail clip on the switch.
3.1.1 Use the screws to screw on the DIN-rail clip on the industrial switch.
3.1.2 To remove the DIN-rail clip, reverse step
3.1.1
.
FIGURE 3-1
DIN-rail Mounting
3.1.3 To hang the industrial switch on the DIN rail, first position the rear side of the switch directly in front of the DIN rail.
Make sure the top of the clip hooks over the top of the DIN rail.
