Allied Telesis AT-IFS802SP/POE, Инструкция по установке и эксплуатации, Страница: 47 / 105

43 AT-IFS802SP/POE(W)-80 User Manual
Work ports • : This column field allows the user to type in the total number of active port up
to four.
With LACP static trunk group
, e.g. you assign four ports to be the members of
a trunk group whose work ports column field is set as two; the exceed ports are standby/
redundant ports and can be aggregated if working ports fail. If it is a
static trunk group
(non-LACP), the number of work ports must equal the total number of group member
ports.
Select the ports to join the trunk group. The system allows a maximum of four ports to
•
be aggregated in a trunk group. Click and the ports focused in the right side will be
shifted to the left side. To remove unwanted ports, select the ports and click .
When LACP enabled, you can configure LACP Active/Passive status for each port on the •
State Activity
tab.
Click . •
Use to delete Trunk Group. Select the Group ID and click . •
Add
Remove
Apply
Delete
Delete
Port Trunk—Aggregator Setting interface (four ports are added to the left field with LACP enabled)