manualshive.com logo in svg

Allied Telesis AT-FS970M/16F8-LC, Руководство по установке, Страница: 45 / 106

Поделиться
Скачать
Allied Telesis AT-FS970M/16F8-LC Скачать руководство пользователя страница 45

FS970M Series Installation Guide

45

Here are the LED guidelines:

The LEDs do not display port speed. That information may be 
displayed using the management software.

The LEDs do not display PoE information on the AT-FS970M/24PS 
and AT-FS970M/48PS Switches. That information may be viewed 
using the management software.

If the port LEDs are off, the switch may be operating in the low 
power mode. To toggle on the LEDs, use the eco-friendly button.

10/100/1000Base-

T Twisted Pair

Port LEDs

The twisted pair ports in the combo ports have link/activity and duplex 
mode LEDs, just like the 10/100Base-TX ports. Refer to Figure 14.

Figure 14. 10/100/1000Base-T Port LEDs

Table 12 describes the LEDs for the 10/100/1000Base-T twisted pair 
ports.

Table 12. 10/101000Base-T Port LEDs

LED

State

Description

Link/Activity

Off

The port has not established a link to an 

end node.

Solid green

The port has established a link to an end 

node.

Flashing 

green

The port is receiving or transmitting 

packets.

Duplex Mode

LED

Duplex Mode

LED

Link/Activity

LED

Link/Activity

LED

Содержание AT-FS970M/16F8-LC











































































































Отзывы:

Нет отзывов