Allied Telesis AT-ANC10S, Инструкция по установке и эксплуатации

Страница: 120 / 124

Appendix B: Cleaning Fiber Optic Connectors
120
Using a Cartridge-Type Cleaner
Fiber optic cartridge cleaners are available from many vendors and are
typically called “cartridge cleaners.” An example is shown in Figure 22.
Figure 22. Cartridge Cleaner
Note
Do not use compressed air or aerosol air to clean a fiber optic
connector.
To clean a fiber optic connector using a cartridge cleaner, perform the
following procedure.
1. With one hand, hold the cartridge cleaner and push the lever on the
cleaning cartridge in the direction of the arrow to expose the cleaning
surface, as shown in Figure 23.
2. Place the ferrule tip on the exposed cleaning surface and rub the
ferrule in a downward direction, as shown in Figure 23.
Figure 23. Rubbing the Ferrule Tip on the Cleaning Surface