manualshive.com logo in svg

Allied Telesis AT-9400, Руководство пользователя

Поделиться
Скачать
Allied Telesis AT-9400 Скачать руководство пользователя страница 134

Chapter 7: LACP Port Trunks

134

Section I: Basic Operations

Deleting an Aggregator

This procedure deletes an aggregator from the switch. The ports that are 
members of the aggregator stop transmitting LACPDU packets after the 
aggregator is deleted. 

Caution

Disconnect the cables from the ports of the aggregator before 
performing the following procedure. Deleting an aggregator without 
first disconnecting the cables can create loops in your network 
topology. Data loops can result in broadcast storms and poor 
network performance.

To delete an aggregator, perform the following procedure:

1. From the Main Menu, type 

1

 to select Port Configuration.

2. From the Port Configuration menu, type 

4

 to select Port Trunking and 

LACP.

The Port Trunking and LACP menu is shown in Figure 35 on page 116.

3. Type 

2

 to select LACP Configuration.

The LACP (IEEE 8023ad) Configuration menu is shown in Figure 39 
on page 126.

4. Type 

5

 to select Delete Aggregator.

The following prompt is displayed:

Enter Aggregator Name [Max up to 20 alphanumeric 
characters]:

5. Enter the name of the aggregator you want to delete. The name is 

case-sensitive. You can delete only one aggregator at a time.

The following prompt is displayed:

Are you sure you want to delete this aggregator (Y/N) [Yes/No] 
->

6. Type 

Y

 to delete the aggregator or 

N

 to cancel the procedure.

If you entered Yes, the aggregator is deleted.

7. To permanently save your change, return to the Main Menu and type 

S

 

to select Save Configuration Changes.

Содержание AT-9400





























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды