background image

Quick Install Guide

3

C613-04042-01 REV D

Models Covered By This Guide

This Quick Install Guide includes information on the following models:

AT-8724XL 24-port 10BASE-T/100BASE-TX Advanced Fast Ethernet 
Switch

AT-8748XL 48-port 10BASE-T/100BASE-TX Advanced Fast Ethernet 
Switch

Quick Install Guide updates can be downloaded from 
www.alliedtelesyn.co.nz/support/at8700xl/.

Package Contents

The following items are included with each AT-8700XL Series switch. Contact 
your sales representative if any items are damaged or missing.

One AT-8700XL Series switch.

One AC power cord (AC models only).

One serial cable for connecting the switch to a terminal or PC.

One 19 inch rack-mount kit.

One AT-8700XL Series Quick Install Guide.

One Safety and Statutory Information booklet.

One AT-8700XL Series Documentation and Tools CD-ROM (which includes 
the complete AT-8700XL Series Document Set and utilities).

One warranty card.

AT-8700XL Series

Printed

Acrobat PDF

Website

Documentation Roadmap

AT-8700XL Series Safety and Statutory Information Booklet

AT-8700XL Series User Guide

AT-8700XL Series Software Reference

General Customer Support

Visit www.alliedtelesyn.co.nz for 
the latest documentation, FAQs, 
and support information.

AT-8700XL Series Quick Install Guide

AT-8700XL Series Hardware Reference

Uplink Module 

Uplink Module Quick Install Guide

Uplink Module Hardware Reference

Содержание AT-8724XL











Отзывы: