Allied Telesis AT-7101GHTm, Руководство по установке

Страница: 24 / 34

AT-7101GHTm PoE Injector Installation Guide
24
Installing the PoE Injector on a Wall
The AT-7101GHTm PoE Injector and power adapter can be installed on a
wall. Perform the following sections:

“Installing the PoE Injector on a Wall,” next

“Cabling the PoE Injector” on page 31

“Installing the Power Adapter on a Wall” on page 26

“Installing the Clamp to the Power Cord and Plug the Power
Adapter” on page 29
Installing the PoE
Injector on a
Wall
To install the AT-7101GHTm PoE Injector on a wall, perform the following
procedure:
1. Review “Reviewing Safety Precautions” on page 16.
2. Provide the following items:

PoE injector

Bracket (included in the shipping box)

Four screws (M3x5mm) to attach the bracket to the PoE injector
(included in the shipping box)

Phillips-head screwdriver (not included)

Two screws to install the bracket to the wall (not included)
3. Place the PoE injector on a flat, secure surface, such as a desk or
table.
4. Align the bracket to the PoE injector as shown in Figure 8.
Figure 8. Aligning the Bracket to the PoE Injector