Quick Install Guide
9
C613-04045-01 REV A
2.
Connect to the WAN.
If you intend to use a firewall, configure it before you activate the WAN link.
Once initial configuration is complete, use a straight-through Ethernet
patch cable to connect the router’s Ethernet WAN (ETH0) port to the
Ethernet port of a WAN device (such as a modem).
LEDs and What They Mean
LEDs indicate the router’s operational status and port activity.
AR450S System LEDs
LED
State
Function
Power
Green
The router is receiving power and the power
switch is in the ON position
System
Amber
The router is malfunctioning
Flashing
The fan has failed
Off
Normal operation
Full Dup
Green
The corresponding port is operating at full-
duplex
Off
The corresponding port is operating at half-
duplex
Link/ACT
Green
A link has been established through the
corresponding port
Flashing
Data is being transmitted through the
corresponding port
Off
No link is present through the corresponding
port
100M
Green
The corresponding port is operating at
100Mbps
Off
The corresponding port is operating at 10Mbps
