Patch 86222-27 For Rapier Switches
37
Patch 86222-27 for Software Release 2.2.2
C613-10319-00 REV Z
When a VLAN was created and then destroyed on the G6 or G6F, the
VTABLE was corrupted. This has been fixed.
DHCP failed to send request messages when it was in a rebinding or
renewing state. This issue has been resolved.
In some extreme traffic conditions the switch could lock up, preventing
switching of any traffic. This issue has been resolved.
When large numbers of sessions were being handled the firewall would
become overly aggressive in restricting new sessions. The
Active TCP Opens
field in the output of the SHOW FIREWALL POLICY would show a very
high number (42
×
10
8
). This issue has been resolved.
If the IGMP table was empty and a timeout was set, a fatal error occurred.
This issue has been resolved.
Features in 86222-04
Patch file details for Patch 86222-04 are listed in Table 23.
Patch 86222-04 includes all issues resolved and enhancements released in
previous patches for Software Release 2.2.2, and the following enhancements:
Message protection validation failures would occur intermittently. This
issue has been resolved.
ISAKMP now interoperates with other vendor’s products in aggressive
mode exchanges.
Support has been added for the 8624XL-80 switch with -48VDC power
supply.
PCR: 01179
Module: SWI
Network affecting: No
PCR: 01181
Module: DHCP
Network affecting: No
PCR: 01185
Module: SWI
Network affecting: No
PCR: 01186
Module: FIREWALL
Network affecting: No
PCR: 01187
Module: IPG
Network affecting: No
Table 23: Patch file details for Patch 86222-04.
Base Software Release File
86s-222.rez
Patch Release Date
24-Aug-2001
Compressed Patch File Name
86222-04.paz
Compressed Patch File Size
220220 bytes
PCR: 01124
Module: PKI
Network affecting: No
PCR: 01136
Module: ISAKMP
Network affecting: No
PCR 01138
Module: CORE, SWI
Network affecting: No
