35
Figure 17 - Control Cable Adjustments
1. Access Cover
2. Clevis
3. Tall Nut
4. Cotter Pin and Link Pin
5. Control Cable
6. Control Lever
7. Screw
8. Jam Nut
9. Screw
B.
See Figure 17. Make sure the positions of the power
control lever are the same as the position indicators on
the decal. Remove the access cover (Item 1) on the
housing to make adjustments. Loosen the jam nut (Item
8) that keeps the tall nut (Item 3) from turning. Remove
the cotter pin and link pin (Item 5) from the clevis (Item
2). Turn the tall nut and clevis to adjust the length of the
control cable (Item 5). Use the link pin and cotter pin to
connect the clevis to the control handle again and check
the operation. When the adjustment is complete, install
the access cover.
Maintenance
Содержание W8L
