Allied Systems H5C Series, Руководство по обслуживанию

Страница: 15 / 109

Section 1
1 - 7
1 Bearing Cone
2 Bearing Cup
3 Intermediate Gear
4 Dental Clutch
5 Drum Pinion Gear
6 Bearing
Cone
7 Bearing Cup
8 O-Ring
9 Freespool Adjust Piston
10 Flangescrew
11 Lockwasher
12 Freespool Adjust Retainer
13 Nut
14 Setscrew
15 Shaft
16 Shifter
Fork
17 Fitting
18 Spring
19 O-Ring
20 Capscrew
23 O-Ring
INTERMEDIATE
GEAR
DENTAL COLLAR
INTERMEDIATE
SHAFT
DRUM PINION
GEAR
FREESPOOL Operation (See Fig. 1-10 & 1-11)
The FREESPOOL arrangement allows mechanical dis-
engagement of the drum gear from the remainder of the
gear train. When
FREESPOOL is selected, a hydraulically-
actuated sleeve disengages the dental clutch from the
intermediate shaft. The drum is now disconnected from
the brake and the winch cannot support a load.
FREESPOOL should not be used if there is a
load on the wire rope. An uncontrolled release
of the load will occur. Loss of the load can
result in equipment damage, personal injury
or death.
The yellow indicator panel on the selector switch lights
when the winch is in
FREESPOOL .
NOTE: The dental clutch may not disengage if there
is a load on the wire rope. Remove the load from the
wire rope to activate the FREESPOOL function.
Figure 1-11 FREESPOOL Arrangement
Figure 1-10 FREESPOOL Operation