Adjusting Handlebar Height
Brake Operation
To adjust the height of the handlebars, unscrew the
tightening handles on either side of the Rollator turning anti-
clockwise and remove. Adjust the height of the handlebars
to suit the user, re-insert the tightening handles and tighten
by turning clockwise to secure (as shown in the picture).
Ensure that the tightening handles and brake cables are on
the outside of the Rollator.
To operate the brakes:
Squeeze the brake levers up and hold in position to
engage the brakes (as shown by the green arrow). Release
the levers to release the brakes.
To lock the brakes:
Push down on the brake lever until it locks and stays in
down position (as shown by the green arrow).
To unlock the brakes:
Pull up on the brake lever until the lock removes
(as shown by the green arrow).
Important:
Ensure that the brakes are locked on when sitting
on the seat.
