• Adjusting the height of the pelvic block. This is done by loosening the knob on either side of
the stander and moving to the desired position. Then retighten the knob to secure. Image
below.
•
Move the knee cups to the desired position. This is done by loosening off the knobs that
control the setting of the height, distance forward and distance laterally. The height, depth and
lateral position of the knee cups can be altered independently. The three images below show
these adjustments
•
Loosen off the turn knob under the footplate – This will then allow you to move the shoe
holder in the horizontal plane in 4 directions. Set to desired position.
