© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Vending
29
512691R4
6. Check to make sure coin slide is operating
properly by inserting coins and starting a cycle.
The IN USE light will turn on, or flash if it is
already on, to indicate proper operation.
NOTE: To avoid long run-down time (45 minutes
factory default) when testing operation, refer to
Test Setting
section.
Installing Extension Onto Coin Slide:
Option 2
1. Install coin slide according to manufacturer’s
instructions.
2. Insert coins into coin slide and slowly push slide
in. Stop before coins fall into coin box. This will
allow installing extension through meter case
service door opening.
3. Install slide extension onto top of coin slide using
two screws and lockwashers. Refer to
Figure 26
.
NOTE: Make sure extension lever is above switch
activation lever.
4. Check to make sure coin slide is operating
properly by inserting coins and starting a cycle.
The IN USE light will turn on, or flash if it is
already on, to indicate proper operation.
NOTE: To avoid long run-down time (45 minutes
factory default) when testing operation, refer to
Test Setting
section.
Slide Extension Assembly – Models
Starting Serial No. 1404
1. Remove slide extension parts from parts
accessories bag included in unit.
2. Install extension lever with arm that has one star
facing down. Refer to
Figure 28
.
3. Install extension lever with rounded corner
facing away from extension bracket using bolt,
flat washer and nut. Refer to
Figure 29
.
4. Install spring to extension bracket with hook
facing down. Install other end of spring to
extension lever with hook facing left while
standing in front of unit. Refer to
Figure 29
.
5. Install extension bracket and lever assembly onto
coin slide bracket using two screws and locknuts.
Refer to
Figure 30
.
TLW2090N
1
Lever Off Switch
Figure 27
TLW20
9
0N
1
Figure 28
Figure 29
One Star
TLW2088N
TLW1610K
Extension
Bracket
Bolt
Washer
Extension Lever
Nut
Rounded
Corner
TLW1610K
Spring
