Alliance Products DALPH1002, Руководство по эксплуатации

Страница: 6 / 16

6
WARNING
Unit must not be run continually and must be turned off between meals.
Otherwise, unit may shut off automatically requiring service reset.
Warranty may be voided if used improperly.
START-UP
A. Overview
These units are designed to heat plastic or stainless steel pellets or plates. The fan
motor, heating element, and power indicator light will come on once the unit is
turned on. There is a power indicator light to let the operator know the power is
on.
The fan motor will begin to circulate the heated air in and around the plates in a
convection process that promotes a quick and even heat absorption by the pellets.
Once the air inside the cabinet has reached the desired and preset temperature, the
thermostat will continue to maintain this temperature by regulating the power to
the heating element. The fan motor will run as long as the unit is energized.
B. Loading
Load carrier shelf by carefully stacking the pellets / plates in each cavity. Always
keep the load leveled on the shelf or it could bind.
C. Power
Set the power switch to the “ON” position. The power switch will light up when
the unit is on.
Keep the cover closed completely to insure proper and efficient heating.
Depending on the stack size, and the pellet / plate material, the heating time will
vary. The heater should always be turned on 60 to 90 minutes before dispensing.
D. Dispensing