Alliance Laundry Systems YT050E, Руководство по установке

Страница: 30 / 61

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
70420301 (EN) 28
Figure 12
How to Change Burner Orifice Size
1. Disconnect electrical power from tumble dryer.
Close gas shut-off valve to tumble dryer. Refer to
Figure 11 .
2. Remove spud holder. Unscrew spud holder nut
near gas valve. Remove the burner orifice(s)
from spud holder. Refer to Figure 12 .
3. Install the new, correct burner orifice(s). Refer to
Figure 13 and Table 1 . Torque each to 9 – 10 Nm.
4. Reinstall spud holder assembly to gas valve,
making certain burner orifice(s) are in line with
burner tube opening. Refer to Figure 13 .
5. Commission tumble dryer for use.
NOTE: Blank burner orifices are Part No.
M400995.
TMB2282N
1 Gas Valve 8 Manifold Pipe
2 Regulator Plate 9 Anti-Torque Ring
3 Burner Orifice 10 Spud Holder Nut
4 Burner Tube Openings 11 Plate
5 Burner 12 Gasket
6 Pressure Tap 13 Regulator Cap
7 Spud Holder
1
10
9
8
7
3
5
4
2
11
13
12
6