Alliance Laundry Systems UWL035K12, Руководство по программированию

Страница: 53 / 64

Testing Machine and Electronic Control Functions
51
F8208801 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
NOTE: On models equipped with a rotation sensor,
“
xxx
” will represent RPM’s and it will alternate
with the other display.
Table 16 (continued)
Production Test Cycle Quick Reference Chart
Display Test Mode Comments
“
oFLo
” Warm Fill to Overflow
“
xxxF
” degrees F or
“
xxxC
” degrees C
depending on the
Fahrenheit/Celsius
programming parameter
Heat water to 110°F or display
temperature
xxx
is degree temperature. This step skipped if not temp-
sensor-equipped. Heater turned off when temperature reached.
“ LoAg ” then “ xxx ” Reduced Wash Speed Forward
with no agitation action This step skipped on 2 Speed models.
“
Ag
” then “
xxx
” Wash Speed Forward with no
agitation action
“
rAg
” then “
xxx
” Wash Speed Reverse with no
agitation action
“
drAI
” then “
xxx
” Drain Distribution Speed
“ PUrg ” Factory Valve Purge
“
SP 1
” then “
xxx
” Extract Speed #1 “very low” This step skipped on 2 Speed models.
“
SP 2
” then “
xxx
” Extract Speed #2 “low” This step skipped on 2 Speed models.
“ SP 3 ” then “ xxx ” Extract Speed #3 “medium” This step skipped on 2 Speed Design 1 and 2 models and
L-Speed Design 4 models.
“ SPIn ” (2 Speed models)
then “ xxx ”
This step skipped on VFD models.
“
Prdn
” End of test Turn Power off
Table 16